No. U5279
P. 4 / 25
2. ARC WELDING SAFETY PRECAUTIONS (continued)
Rotating parts may cause injuries. Be sure to observe the following.
If hands, fingers, hair or clothes are put near the fan’s rotating parts or wire feeder’s feed roll,
injuries may occur.
1.
Do not use this equipment if the case and the cover are removed.
2. When the case is removed for maintenance/inspection and repair, certified or experienced
operators must perform the work. Erect a fence, etc. around this equipment to keep others
away from it.
3.
Do not put hands, fingers, hair or clothes near the rotating fans or wire feed roll.
ARC WELDING work areas are potentially hazardous.
FALLING or MOVING machine can cause serious injury.
Use both eyebolts, if installed, to lift the welding power source.
Put the welding power source and wire feeder solidly on a flat surface.
Do not pull the welding power source across a floor laid with cables and hoses.
Do not put wire feeder on the welding power source.
Do not put the welding power source and wire feeder where they will pit or fall.
WELDING WIRE can cause puncture wounds.
Do not press gun trigger until instructed to do so.
Do not point gun toward any part of the body, other people, or any metal when threading
welding wire.
