3.2 Operation Switch Design
3-3
5
If the code number to be input is not known, press the f8 <Code List> key.
>> The contents of Table 3.2.2 List of operation switch keys now appears in the list on
the right side of the screen.
There are two lists. One is a list of the lamps, push buttons and other operation switches
whereas the other is a list of the functions which are allocated to the f keys on both sides
of the mode screen.
Any kind of key can be laid out anywhere on the interface panel screens.
To select the list to be displayed, select the radio button at the top of the screen
by pressing the [ENABLE] and [Left] or [Right] cursor keys.
Kinds = Function
Kinds = Operation switch
f keys on both sides of mode screen
Lamps, push buttons, etc.
＋
Select the desired item from the code list using the [Up] or [Down] cursor key and
press the [Enter] key to insert the code.
Alternatively, the original setting screen can be restored by pressing the
[RESET/R] key.
＋
6
Align the cursor with "Name", and input the name to be displayed.
The soft keyboard is started up by pressing [ENABLE] and [EDIT].
>> Names consisting of 16 full-size characters or 32 half-size characters can be recorded.
If the “Functionless code name setting” item in the “Interface panel condition setting”
menu is set to “Display”, the name setting can be made even with “0” set to the code.
7
Next, set the data for the details other than the names and font size.
Align the cursor with the target line, and press the f9 <Refer> key.
>> The operation switch detail setting screen such as the one shown below now appears.
