No.P10224
P. 34 / 47
11. APPLIED FUNCTION (continued)
11.5 AC Pulse welding
(1) Precaution against the use of AC Pulse mode
When performing AC pulse welding, follow the instructions below.
1. Do not use an unnecessary long extensive cable.
2. When using an extension cable, abide by the notice below.
NOTICE:
・
Bind the torch cable and the base metal
cable and tape them.
・
Try to layout the torch cable as straight as
possible. If it is impossible to do so,
layout the cable on the base metal.
3. In case where the torch cable is coiled, follow the instructions below.
CORRECT WRONG
Cable coiled in two directions.
Refer to “How to coil the torch cable for
details”.
Cable coiled in one direction.
How to coil the torch cable
Step 1
Step 2
Step 3
Top view
Side view
Instructions
Coil a torch cable one way
and check if number of
turns and diameter of A are
equal to those of B.
Place B on A as
illustrated above.
After placing B on A,
bind the coil of a cable
with ropes to avoid
getting loose.
