No.P10224
P. 14 /47
7. TRANSPORT AND INSTALLATION
7.1 Transport
WARNING
Follow the instructions below to avoid trouble and product damage when transporting the
machine.
●
Do not touch charging parts either inside or outside the welding machine.
●
With the line disconnect switch disconnected, when transporting the welding
machine.
●
When hanging the welding power source with a crane, fix a case or a cover
with eyebolts.
●
Use two wires when hanging the equipment with a crane.
●
When moving the welding power source with a forklift, secure the wheels to
prevent possible rolling of the power source.
7.2 Installation
WARNING
When installing the welding machine, follow the instructions below to avoid fire caused by
welding and physical damages by fume gas.
●
Do not install the welding machine near combustible materials and
inflammable gas.
●
Remove combustible materials to prevent dross from coming into contact
with combustible objects. If you can not do so, cover them with
noncombustible covers.
●
To prevent the danger of gas poisoning and suffocation, wear a respirator or
adequately ventilate.
●
To prevent disorder or poisoning caused by fume, wear a respirator for
breathing approved by the local regulation.
●
Adequately ventilate or wear a respirator when using the machine in a tank,
a boiler, a hold of a ship. Because heavier gas such as carbon dioxide or
argon gases are drifting.
●
When using the machine at a narrow space, comply with a trained
supervisor’s directions.
