9
VTH Monitor Configuration
To configure the VTH unit use the built in menu within the monitor itself, VTH units do not support web browser configuration.
Select
Settings
and input the
engineer password: 002236
(default)
The
Product Info
menu is used to set the room number of the VTH and to configure the unit as a Master or Extension unit. When
configuring a modular system, each monitor will be configured as a Master.
In the
Room No
field input the room number, such as 1 for apartment 1.
Select
Settings
and then
Project Settings,
in the project settings menu select
NetSet
to configure the VTH network settings. When
configuring the network address of the VTH it is vital to ensure the IP address range is within the same Subnet as the VTO.
For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the
VTH, select
Network
and input the VTO units IP address and set
Enable Status
to
ON.
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com
