10
To add the VTH to the VTO, revisit the VTO web browser and go to
System Config > Indoor Manager > Add
. Input a family name, first
name and Nickname, these are purely for reference. Enter the VTH Short number
This number must match the Room Number set in
the VTH Product Info page
. For details on self password see page 11.
Click
OK
to confirm the setting.
Repeat the process for additional monitors, each time setting the monitor to a unique IP address and Room Number.
To program the module buttons, go to
System Config > Local Config > Facade Layout
. On the module images, click the relative
buttons to assign a specific apartment number to it.
For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the
VTH, select
Network
and input the VTO units IP address and set
Enable Status
to
ON
.
VTH Monitor Configuration
