V
disconnect all the cables, and then contact your local customer service center.
●
Do not stuff foreign materials into the Camera to prevent a short circuit which could result in the
Camera being damaged or people becoming injured.
●
Use the factory default package or material of equal quality to pack the Camera when
transporting it.
●
Do not squeeze, violently vibrate or immerse the device in liquid.
Operation and Maintenance Requirements
●
Do not touch the heat dissipation component of the Camera or you might get burnt.
●
Do not dismantle the Camera. The internal components can only be repaired by a qualified
professional. Dismantling it without professional assistance might cause water seeping in or
might result in the Camera producing poor quality images.
●
Do not touch the photosensitive Camera with your hands. Use an air blower to clean the dust on
the lens. For deeper cleaning, pour a little alcohol on to a piece of dry cloth and then softly wipe
the dirt away.
●
Clean the Camera body with a piece of soft dry cloth. For any dirt that is hard to remove, pick up a
piece of clean and soft cloth, dip it into a little neutral detergent and gently wipe the dust away.
After that, wipe away all the remaining liquid on the Camera with another dry cloth. Never use
volatile solvents such as alcohol, benzene and thinner, or cleaners that are strong and abrasive.
Otherwise, the Camera’s surface coating will be damaged and its working performance will be
encumbered.
●
After unpacking, the problems that the packaging bag is damaged, leaking, or the desiccant
particles in the packaging bag are of different colors will not affect the normal use of the Camera.
●
Use the accessories regulated by the manufacturer. The Camera should be installed and
maintained by qualified professionals.
●
Make sure that the surface of the Camera is not irradiated from laser when using laser product.
●
Do not provide two or more power supply modes to the Camera, otherwise the Camera might
sustain damage.
●
If the Camera malfunctions, contact your local customer service center. Do not dismantle the
Camera.
