4
3 Basic Configuration
●
We recommend you install the Camera before configuring the network.
●
The figures in this manual are for reference only, and might differ from the actual interface. For
more details, see
Thermal Hybrid Camera_Web Operation Manual
.
3.1 Initializing Camera
You can initialize the Camera through the ConfigTool, or by connecting the computer to the Camera,
and logging in to the web interface with the default IP address.
●
To initialize multiple devices at the same time in batches, use the ConfigTool.
●
To initialize one device at a time, log in to the web interface.
●
Initialize the device for first-time use after performing a factory reset.
●
To keep the data on the Camera secure, keep the admin password safe after initialization and
regularly change it.
●
Make sure the Camera IP address (192.168.1.108 by default) and the IP address of the computer
are on the same network segment.
Step 1
Open IE browser, enter the Camera default IP address in the address bar, and then press
the
Enter
key.
Step 2
Set the login password of admin and the email address.
●
The email address is for password reset.
●
We recommend entering your email address in case you forget the password and need
to reset the password.
Figure 3-1 Device initialization
Step 3
Click
Save
to complete initialization.
