10
SN
Port
Port name
Connector Function description
7
VIDEO OUT
Video output
port
BNC
Generally it outputs analog video signal, it
can connect to TV monitor to check image.
Plug the connector into the network port
before powering up the device, then the
device is powered on, at this moment, BNC
outputs HDCVI signal.
Table 2-1
Please refer to Table 2-2 for introduction of I/O port function.
Port
Color
Cable port name
Function description
I/O port
Green ALARM_COM
Alarm output common port
Brown ALARM_NO
Alarm output port, output alarm signal to alarm
device.
NO: Normally open alarm output port
The port needs to be used together with
ALARM_COM port.
Blue
ALARM_IN1
Alarm input port 1; receive the on-off signal of external
alarm source.
White
ALARM_IN2
Alarm input port 2; receive the on-off signal of external
alarm source.
Gray
ALARM_GND
Grounded terminal.
Table 2-2
Note
Configure device initialization:
After the device is powered on (the connector is not plugged into the network port), plug the connector into
the network port when the device starts normally and it has access to visit WEB interface, plug out the
connector after waiting for about 5 seconds, the device will reboot automatically and restore factory default
setting (including IP, user password and etc.).
2.2
Dimension
Note
The figure below is for reference only, which is used to know the device dimension. Please refer to the real
product for more details.
Please refer to Figure 2-2 for the dimension of device structure. The unit is mm (inch).
Figure 2-2
