Dahua TPC-BF1241-B3F4-S2, Web Operation Manual, Page: 113 / 173

107
Select Setting > Smart Thermal > Pic in Pic . Step 1
The
Pic in Pic
interface is displayed. See Figure 4-55.
Pic in pic Figure 4-55
Select the Enable check box. Step 2
Drag the blue box’s corner to enlarge the box. Click in the box and drag your mouse to Step 3
adjust the box’s location.
Click Save . Step 4
4.4.9 Configuring Link Schedule
Select
Setting > Smart Thermal > Link Schedule
. Step 1
The Link Schedule interface is displayed. See Figure 4-56.
Link schedule Figure 4-56
Configure periods for each weekday. Step 2
In Figure 4-56, you can hold your mouse’s left button to directly drag a period bar for each
weekday.
1)
In Figure 4-56, click
Setting
next to the green bar and the dialogue box of
Setting
is
displayed. See Figure 4-57.