Local Configurations
150
Configure the settings for the HDD event. See Table 5-42.
Parameter
Description
Event Type
In the
Event Type
list, select
No HDD
,
HDD Error
, or
HDD No Space
as the event type.
Enable
Enable or disable the HDD event detection function.
Alarm Out
Click
Setting
to display setting interface.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected
alarm box.
Wireless Siren: Enable alarm activation through devices
connected by USB gateway or camera gateway.
Latch
Set a length of time for the Device to delay turning off alarm after the
external alarm is cancelled. The value ranges from 10 seconds to 300
seconds, and the default value is 10 seconds.
Show Message
Select the
Show Message
check box to enable a pop-up message in
your local host PC.
Alarm Upload
Select the
Alarm Upload
check box to enable the system to upload the
alarm signal to the network (including alarm center) when an alarm
event occurs.
Summary of Contents for Smart 1U
