23
6
Pole Mount Bracket Installation
6.1
Component Installation
Pole mount bracket needs to be used with a junction box, please refer to Figure 6-1 for the
accessories which are needed for installation.
Figure 6-1
6.2
Pole Mount Bracket Installation Steps
6.2.1 Installation Requirements
The pole-mounted speed dome can be installed in the hard construction wall in the indoor or
outdoor environments.
Before the installation, please make sure:
The pole bracket can sustain the 8X weight of the speed dome.
The diameter of the pole structure shall conform to the installation dimension of the clamp.
Default factory clamp is 5 inches for the column of
φ
80-130mm. It can work with the pole
mount bracket. You can adjust the diameter and the value (clamp specification) is :
φ
59-
82mm
、φ
84-108mm
、φ
80-130mm,
φ
130-152mm
、φ
155-178mm
、φ
180-203mm,
φ
194-
216mm.
It is optional according to the users’ requirements, and special dimension can be
customized.
6.2.2 Installation Steps
Step 1
Please refer to Figure 6-2 to install clamp and pole bracket.
Summary of Contents for SD60-***-SL Series
