20
5
CORNER MOUNT BRACKET INSTALLATION
5.1
Component Installation
The corner mount bracket needs to be used with a junction box, please refer to Figure 5-1 for the
accessories which are needed for installation.
Figure 5-1
5.2
Corner Mount Bracket Installation Steps
5.2.1 Installation Requirements
The corner mount speed dome can be installed in the hard construction wall in the indoor or
outdoor environments where there is a 90
︒
angle. Before the installation, please make sure:
The wall is thick enough to install the expansion bolts.
The wall can at least sustain the 8x weight of the speed dome.
5.2.2 Installation Steps
Step 1
Please draw punching position in the wall with a 90-degree angle according to the mounting
holes of the corner mount accessories. Then you can dig holes and insert M8 expansion bolts.
Pull the integration cable through the center hole on the bottom of the corner mount bracket and
reserve enough cable connection length and then use the M8 expansion bolts to secure the
corner mount bracket chassis on the wall firmly, finally cover the outlet hole with silicon sealant to
make it sealed and waterproof. Please refer to Figure 5-2 for more details.
Summary of Contents for SD60-***-SL Series
