Advanced Settings 10
1) Click
Add Interface
.
A new record is added. See Figure 4-3.
VLAN interface
Figure 4-3
2) Set the parameters. See Table 4-1.
Table 4-1 VLAN interface
Parameter
Sub-parameter
Description
VLAN
-
Input VLAN number.
IPv4
IP Address
Set the IP address of the VLAN interface.
Mask Length
Set the mask length of the IP address.
Add IP route.
Step 3
1) Click
Add Route
.
A new record is added. See Figure 4-4.
IP routes
Figure 4-4
2) Set the parameters. See Table 4-2.
Table 4-2 IP routes
Parameter
Description
Network
It is the destination address of the IP packet.
Mask Length
Mask length, with destination address, is to identify the IP address of
the destination host or the route. After logical AND between
destination address and network mask, you can get the IP address of
the destination host or the route.
Gateway
The gateway IP address of the route.
Click
Save
.
Step 4
4.1.1.3 NTP
Enable NTP function, and the switch can synchronize with the network time automatically.
。
Select
Advanced > Configuration > System > NTP
.
Step 1
NTP Configure interface is displayed. See Figure 4-5.
