Dahua PFS4218-16GT-190 Page 4 Web Config Manual Download

Page: 4 / 86

Foreword III

Privacy Protection Notice

As the device user or data controller, you might collect personal data of others' such as face,

fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be

in compliance with the local privacy protection laws and regulations to protect the legitimate

rights and interests of other people by implementing measures include but not limited to:

providing clear and visible identification to inform data subject the existence of surveillance

area and providing related contact.

About the Manual



The Manual is for reference only. If there is inconsistency between the Manual and the

actual product, the actual product shall prevail.



We are not liable for any loss caused by the operations that do not comply with the Manual.



The Manual would be updated according to the latest laws and regulations of related

regions. For detailed information, see the paper User's Manual, CD-ROM, QR code or our

official website. If there is inconsistency between paper User's Manual and the electronic

version, the electronic version shall prevail.



All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the Manual. Please

contact the customer service for the latest program and supplementary documentation.



There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, please refer to our final explanation.



Upgrade the reader software or try other mainstream reader software if the Guide (in PDF

format) cannot be opened.



All trademarks, registered trademarks and the company names in the Manual are the

properties of their respective owners.



Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.



If there is any uncertainty or controversy, please refer to our final explanation.

Summary of Contents for PFS4218-16GT-190























































































Search results

Summary of Contents for PFS4218-16GT-190

Reviews:

Related manuals for PFS4218-16GT-190

Brands by name

Popular brands

Dahua PFS4218-16GT-190, Web Config Manual

Search results

Summary of Contents for PFS4218-16GT-190

Reviews:

Related manuals for PFS4218-16GT-190

Brands by name

Popular brands