Dahua Network Video Server
User’s Manual
43
Figure 4-45
Check the box to enable send SMS/SMS activate/tel activate function.
Input sender/caller cellphone number and then click
to add the cellphone user to the
list.
Select a number in the list and then click
to delete current number.
Send SMS: Check the box to enable this function. Various kinds of alarm can trigger
the NVS to send out alarm message to the receiver.
SMS activate: Check the box to enable this function. The user can send out the
message to the receiver to enable/disable 3G module.
Telephone activate: Check the box to enable this function. The user can call the 3G
user to enable/disable 3G module.
Click OK to complete the setup.
4.4.2.5 PPPoE
From main window->Setup->Network->PPPoE, the PPPoE interface is shown as in
Figure 4-46.
Input the PPPoE user name and password you get from the IPS (internet service provider)
and enable PPPoE function. Please save current setup and then reboot the device to get
the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the
WAN from the IP address column.
Please note, you need to use previous IP address in the LAN to login the device.
Please go to the IP address item to view the device current device information. You
can access the client-end via this new address.
