22
Section 9:TV adjust/Screens
TV Adjust
It is not for splicing wall. It is for current screen only.
This function is for 4-channel 4K high definition and 1/4-channel high definition series only.
The 1-channel 4K high definition series product does not support this function.
It is to adjust margin. This function is valid for BNC output only. The margin value ranges
from 0 to 100.
Figure 3-7
Screens
This function is for 4-channel 4K high definition series product only.
Click
, system pops up screen on-off button, system BLC mode and
screen adjust interface. See Figure 3-8.
Screen Power
The screen on-off interface is shown as below. Select a screen, you can see its color is
yellow, and then click on/off button.
Figure 3-8
Before the screen on-off operation, please connect the RJ45 port of the 4-channel 4K high
definition series product to the COM port of the monitor.
For the LCD from our company, 2 is to receive data, 3 is to send out data and 5 is GND.
RJ45 COM port of the 4-channel 4K high definition series product: 1 is to receive data, 8 is
to send out data, 5 is GND.
Please connect the 1 of the device to the 3 of the LCD, 8 of the device to the 2 of the LCD,
and 5 of the device to the 5 of the LCD. For the other cable, you can just cut off.
