Dahua NVR2 Series NVR2208 User Manual Download

Page: 95 / 181

User Manual of NVR2XXX(-P4-P8) Series NVR

7.1.3

Backing up by Event Search

Purpose:

Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), or SATA

writer. Quick Backup and Normal Backup are supported.

Steps:

Enter Export interface.

Menu>Export>Event

Select “Alarm Input” from the dropdown list of Event Type.

Select the alarm input No. and time.

Click

Search

button to enter the Search Result interface.

Figure 7. 15

Event Search for Backup

Select record files to export.

Select an alarm input in the list and click

Quick Export

button to enter Export interface.

Clicking

Details

button will take you to the interface with detailed information of all channels

triggered by the selected alarm input.

Note:

Event types contain Alarm Input and Motion.

Clicking

Quick Export

button will export record files of all channels triggered by the selected

alarm input.

Figure 7. 16

Result of Event Search

Click

Details

button to view detailed information of the record file, e.g. start time, end time, file

size, etc.

Summary of Contents for NVR2 Series NVR2208






















































































































































































Search results

Summary of Contents for NVR2 Series NVR2208

Reviews:

Related manuals for NVR2 Series NVR2208

Brands by name

Popular brands

Dahua NVR2 Series NVR2208, User Manual

Search results

Summary of Contents for NVR2 Series NVR2208

Reviews:

Related manuals for NVR2 Series NVR2208

Brands by name

Popular brands