Dahua NVR2 Series NVR2208 User Manual Download

Page: 86 / 181

User Manual of NVR2XXX(-P4-P8) Series NVR

Figure 6. 34

Right-click Menu under Playback

The right-click menu:

Note:

This menu differs slightly from one playback interface to another.

Table 6. 6

Detailed Explanation of Right-click Menu under Playback

Button

Function

Return to Search interface

Enter Digital Zoom interface

Show & hide control interface

Return to Playback interface

6.2.3

Adverse Playback of Multi-channel

Purpose:

You can play back record files of multi-channel adversely. Up to 8-ch (with 4CIF resolution) simultaneous adverse

playback is supported; up to 4-ch (with 720P resolution) simultaneous adverse playback is supported, up to 2-ch

(with 1080P resolution) and up to 1-ch (with 5MP resolution) reverse playback is supported.

Steps:

Enter Playback interface.

Menu>Playback

Set the search condition and click

Search

to enter the Search Result interface.

If more than one channel is optional, click

to choose channels for simultaneous playback.

Figure 6. 35

Select Channels for Synchronous Playback

Check

checkbox to select the channel(s) and click

to confirm the settings and enter the synchronous

playbck interface.

Summary of Contents for NVR2 Series NVR2208






















































































































































































Search results

Summary of Contents for NVR2 Series NVR2208

Reviews:

Related manuals for NVR2 Series NVR2208

Brands by name

Popular brands

Dahua NVR2 Series NVR2208, User Manual

Search results

Summary of Contents for NVR2 Series NVR2208

Reviews:

Related manuals for NVR2 Series NVR2208

Brands by name

Popular brands