48
Figure 3-67
1) Use mouse, touch panel or the keyboard to input number j+WIN to select one window.
There are three situations:
If there is no screen available, system switches to screen that contains this window
and set this window as current one.
If there is a screen available and the window is in current screen, set this window as
current one.
If there is a screen available but the window is not in the screen, then system
switches to the screen that contains the window and set this window as current one.
2) Input number k+CAM on the keyboard or select one channel and drag it to the
window you selected in the first step; you can output the video to the window you
specified at the matrix end. Or you can drag whole customized folder to the window,
or click number k+CAM-G on the keyboard to output a group of video sources to the
TV wall.
Select one window, click close preview of the
, system closes the preview video
of the output channel of the decoder.
Select one window, click
（
NEXT
）
or
（
PREV
）
, you can output the previous or next
video source to the selected window.
Tour setup:
In the Input and output setup interface, you can set tour time. When input the
customized folder and the channel amount on the folder is larger than the output channel
amount, system enables tour automatically. See Figure 3-68.