8
Figure 3-6
3.2.2.2 Network
There are two ways for you to select: LAN and WLAN.
3.2.2.2.1 LAN
The wire network interface is shown as below. See Figure 3-7.
You can use the direction keys and number keys to set. You can use the touch panel
or the left/right button to move the cursor to the corresponding position and then use
the number keys to change the setup.
z
IP address: Here you can input IP address.
z
Subnet mask: You can input subnet mask here.
z
DHCP: It is to auto search IP. When enable DHCP function, you can not modify
IP/Subnet mask /Gateway. These values are from DHCP function. If you have not enabled
DHCP function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP
function to view current IP information.
Please note you need to have the router and
enable the DHCP function before you use this function.
z
TCP port: Default value is 37777.
z
Preferred DNS server: DNS server IP address.
z
Alternate DNS server: DNS server alternate address.