28
Decoded video group to the video wall (Input group->output window)
You can refer to the above contents for detailed information. The difference is that you
need to select a window for the output channel. You need to set the input channel of the
input group to one window of the output channel to enable the tour function. If there is only
one input channel, it is just like the dynamical decode in the output window.
Please follow the steps listed below.
1) Input i+MON, it is to select the output channel i.
2) Input j+WIN, select the window j for current output channel.
3) Input k+CAM-G, select to output the current input group k to the output channel
window j to enable the tour function.
Decode video to the video wall (Input group->output group)
You can refer to the above contents for detailed information. If the channel amount n in the
input group is smaller than or equal to the output window amount
m
in the output group
(for example, output group 1 has two output channels, and each output channel has
4-window. There is total 8-window. Here you need to compare
n
and 8.). It is to decode the
signal from the input channel to the output channel respectively. If the
n
is larger than
m
,
system decodes and outputs
m
output channel until the remaining input channel is smaller
than
m
.
Please follow the steps listed below.
1) Input m+MON-G, it is to select the output group
m
.
2) Input n+CAM-G, it is to output the input group
n
to the output group
m
to enable the
tour function.
3.3.5.4 Playback of the decoder record
It is to control the output channel to playback the record file of the decoded input channel
remotely. You need to select the output channel and input channel and set the
corresponding playback time. See Figure 3-43.
Please follow the steps listed below.
1) Input i+MON, it is to select the output channel i.
2) Input j+WIN, it is to select the window of current output channel.
3) Input k+CAM, select input channel k. You can skip to the next step if current channel
already decodes in current playback channel.
4) Click
►
(PLAY/PAUSE), you can go to the decoder record file playback setting
interface. (Right now, there is no playback in current window).
5) Set playback start time and end time. Please input the time (second-minute-hour) and
select the day-month-year. Click the OK button to begin the playback.
6) During the playback process, you can click
f
(PLAY/PAUSE
）
to pause current
operation, click
▀
(STOP) to stop playback.