49
shown in Figure 3-28.
Caution
After power on, when the ground station doesn’t require other operations, please always keep
the aircraft horizontal and static; otherwise, it may result in initialization failure.
Figure 3-28
3.9 Check and Debugging
Warning
The subsequent steps can be implemented only after checking and debugging all the items
listed in the chapter below. Besides, the remote control and ground station prompt that each
status is normal and the aircraft indicator light flashes green.
Tips
It is recommended to set the display image of remote control and ground station as video
preview mode before taking off.
Check operation condition. Please debug each component to make it operate normally when
both the remote control and ground station prompt abnormity.
It is going to list common calibration items, abnormities and its solutions in the following
chapter.
3.9.1 Aircraft Diagnosis
Abnormities
There is no image transmission or data transmission display on the ground station.
Exact Operation
Step 1 Select "Aircraft Settings > Diagnosis" to enter diagnosis interface, as shown in Figure
Summary of Contents for Navigator X820
