41
3.3.3 Ground Station Charging
The entire charging period (from 0 to 100) needs approximately 3.5 hours.
Step 1 Connect the ground station to power adapter with a charging cable, as shown in Figure
Figure 3-11
Step 2 Connect power adapter to AC power (AC 100V-240V).
Step 3 Check charging status: it means the ground station is charging when the indicator light
on the right of ground station handle is orange and normally on. It means charging is
done when the indicator light becomes green and normally on.
Step 4 Disconnect it from the power socket, and then disconnect other cables after charging
is completed.
3.4 Prepare Equipment
3.4.1 Prepare Airborne Equipment
Note
The following chapter is optional for operation.
Please implement demounting step first and then connection step when the PTZ camera
needs to be replaced.
It only needs to implement demounting step when the aircraft flies directly without PTZ
camera.
3.4.1.1
Demount PTZ Camera
Step 1 Loosen four mounting screws, as shown in Figure 3-12.
Summary of Contents for Navigator X820
