Dahua NAVIGATOR X1100, User Manual

Page: 97 / 102

85
Aircraft State Indicator
The aircraft status indicator over the power switch is turned on after the aircraft is enabled.
Different colors and statuses mean differently. Please refer to the Appendix Table 2-1.
Please do understand the contents listed in the table below before flight, which is to help you
quickly understand the aircraft status or positioning problem during flight. The actual operation
methods will be specifically introduced in other chapters.
Phase
Indicator color and
status
Implication Operation
Startup
●●● ●●● ●●●
… Self-check and preheating Wait
●
Normally on System self-check report error -
● ● ●
… Aircraft in no-fly zone
Move the
aircraft out of
no-fly zone.
Please refer to
“3.8 Check and
Debugging” for
the flight area.
Compass
calibration
●
Normally on Horizontal calibration of compass Wait
●
Normally on Vertical calibration of compass Wait
●● ●● ●●
… Calibration failure of compass
Manually
calibrate
compass
Pair
●
Normally on Pairing success -
Flight
● ● ●
… Take off normally -
●
Flash once
fixed point mode and satellite
number
≥6
-
●
Flash twice
fixed point mode and satellite
number
＜
6
-
●
Flash once
Intelligent mode and satellite
number
≥6
-
●
Flash twice
Intelligent mode and satellite
number
＜
6
-
●
Flash once Fixed altitude mode -
●●● ●●● ●●●
…
-
Disconnected from remote
control for more than 3s
-
●●● ●●● ●●●
… Level 1 low battery warning -
●●●● ●●●● ●●●●
… Level 2 low battery warning -
●●●● ●●●● ●●●●
… -
Disconnected from remote
control for more than 3s
-