Web Operation Manual
62
Radar configuration (single lane)
Figure 5-49
2)
Configure radar parameters.
Table 5-30
Description of important parameters of the radar
Parameter
Description
Start Lane
The number of lanes on which the radar has been enabled.
Work Mode
Select the work mode of the radar from
Speed
Measure
Mode
,
Calculate
Mode
,
Single
,
Continuous
and
Manual
.
Begin Lane
The lane number on which the radar starts detecting.
Interval
During the interval, the radar only detects one object.
This function works together with a special program.
Detect Mode
The direction of radar detection.
Trigger Speed
The low speed limit that triggers the radar to send a capture signal to the Camera.
Once the vehicle exceeds the limit, the Camera takes a snapshot.
Pre Speed Wait
During the speed wait, if the Camera reads the speed from the radar, it is the
vehicle speed; Otherwise, the displayed vehicle speed is a random value within the
speed limit.
Delay Speed Wait
Angle
The angle between the radar beam and vehicle driving direction.
Sensitivity
Supports adjusting the sensitivity of the radar capture. 5 is the most sensitive.
3)
Select
RS-485
to enable multi-lane radar detection.