Web Operation Manual
72
Date & time
Figure 5-61
Configure the parameters.
Step 2
Table 5-37
Date & time parameters
Parameter
Description
Date Format
Select the date format. Three formats are available:
YYYY-MM-DD
,
MM-DD-YYYY
and
DD-MM-YYYY
.
Time Format
Select the time format. Two formats are available:
24-Hour
and
12-Hour
.
Time Zone
The time zone where the Camera is located.
System Time
The current time of the Camera.
Sync PC
Synchronize the time of the Camera to that of the PC.
Click
Sync PC
, and the settings will immediately take effect.
DST
Select the
DST
(means daylight saving time)
checkbox, set the
DST Type
by
Date
or
by
Week
, and then configure the
Start Time
and
End Time
of DST.
Check Time
Mode
Time synchronization mode. You can select
NTP
(network time protocol) or
Satellite
.
NTP Server
The IP address and the port number of NTP server.
Required when
NTP
is set to
Check Time Mode
.
Port
Interval
The time synchronization interval of the Camera and the NTP or satellite.
Click
Confirm
.
Step 3
5.7.2
Account Management
You can add or delete users and user groups, assign permissions to new users and user groups,
change passwords, and manage users and user groups.