User's Manual
24
health status of devices, remotely configuring devices, and fixing errors.
4.6.1 Checking Device Health Status
You can check the online and offline status of devices in real time, and check the health status of
devices one at a time or in batches. This section uses checking in batches as an example.
The configurations for these can be found in
Site mode
and
Device mode
. The operations for these
two modes are similar. This section uses configurations in
Device mode
as an example.
Step 1
On the
Home
screen, tap
, and then it goes to
Sites
screen.
Step 2
Tap on the upper-left corner to switch to
Device mode
.
Step 3
Tap
.
Step 4
Select devices you want to check, and then tap
X devices selected. Start Health Check
.
To select all devices, tap
Select all
.
Step 5
View checking results, and then tap
OK
.
Offline devices cannot be checked.
4.6.2 Device Basic Configurations
After adding devices, including the alarm hub and accessories, you can view and edit general
information of the device.
Step 1
On the
Home
screen, tap
, and then it goes to
Sites
screen.
Step 2
Tap on the upper-left corner to switch to
Device mode
.
Step 3
In the device list, select the device as needed.
Step 4
On hub screen, tap
to view and edit general information on the device.
Table 4-1 Parameter description
Parameter
Description
Device Configuration
●
View device name, type, and SN.
●
Edit device name, and then tap
Save
to save configuration.
Hub Status
For details, see "4.6.2.2 Configuring the Hub".
Hub Setting
For details, see "4.6.2.1 Viewing Status".
Time Zone
Tap
Time Zone
to select your time zone, and enable DST (daylight
saving time) if necessary.
●
Time Zone
: Select the time zone in which the hub operates.
●
DST
: Select date or week, and then select start time and end
time.
Network Configuration
Tap
Network Configuration
to view your present network
information.