3. Buckle the safety hook, connect cable and use insulated tape to make it waterproof. Pull the
cable into the wall-mounted bracket and use stainless screws to fix the speed dome on the
bracket.
Caution
Please make sure the safety hook is installed, otherwise the thermal hybrid dome may fall and
cause accident due to instability! Please refer to the safety hook installation instruction in the
accessories bag for more details.
4. Pull the cable through corner-mounted bracket and then use screws to fix the device and
wall-mounted bracket on the corner-mounted bracket.
5. Check if the speed dome is firmly fixed and then device installation is completed, which is
shown in Figure 3-5
②
.
Step 2
Connect the external cable well according to the requirements.
Please refer to step 2 of 3.3.1 Wall-mounted Installation for more details.
Step 3
(Optional) Install waterproof connector for network port.
Please refer to step 3 of 3.3.1 Wall-mounted Installation for more details.
3.3.4 Pole-mounted Installation
Note
It is equipped with 5-inch hose clamp by default (fit for
φ
80mm
～
130mm column), which is used
together with the column (pole) mount bracket, the diameter is adjustable, the adjustment range
is the clamp specification (there are seven kinds of size for users to select):
φ
59mm
～
82mm,
φ
84mm
～
108mm,
φ
80mm
～
130mm,
φ
130mm
～
152mm,
φ
155mm
～
178mm,
φ
180mm
～
203mm,
φ
194mm
～
216mm; It is optional according to the
users’ requirements; the special size
is customizable as well.
Figure 3-6
Step 1
Fix the device on the mounting pole.