Figure 3-3
1. Keep the convex groove outward and install the rubber ring into the network port, keep the
smaller hole of the rubber ring outward and install the fixing rubber ring into the main body of
the waterproof connector.
2. Pull the network cable without crystal head through main body of waterproof connector, fixing
rubber ring and waterproof locking cover, make the crystal head of network cable, and then
insert it into the network cable.
3. Put the main body of waterproof connector on the network port and rotate it clockwise to lock
the network port and waterproof connector firmly.
4. Put the waterproof locking cover on the main body of waterproof connector and rotate it
clockwise to lock the waterproof connector and waterproof locking cover firmly.
3.3.2 Hang-mounted Installation
Note
The adjustable range of hang-mounted bracket length is 200mm (default) and 400m (optional), it
only needs to replace the connection pole.
Figure 3-4
Step 1
Fix the device on the mounting surface.
1. Split the connection tray and the connection pole, dig holes on the mounting surface, insert
expansion bolts, fix it with nut and paste glass cement on it to make it sealed and waterproof,
as it is shown in Figure 3-4
①
.