6
This chapter of installation includes IR intelligent speed dome and network IR intelligent speed
dome.
1.6.1 Overview
The speed dome has various brackets suitable for different environments. For detailed
information, please refer to chapter 2 and chapter 4. Here we are going to install the IR speed
dome with the analog wall mount bracket.
1.6.2 Installation Conditions
Wall mount bracket is for the indoor and outdoor hard wall construction environments.
Before the installation, please make sure the wall thickness can sustain the expansion bolt. The
wall can support at least the 8X of the speed dome weight.
1.6.3 Dig Installation Holes
Draw the installation holes in the wall according to the holes at the bottom of the wall mount
bracket. Dig the installation holes. Insert the expansion bolts into the holes. (Please note the
expansion bolts are not included in the accessories bag.). See Figure 1-4.
Figure 1-4
1.6.4 Speed Dome Installation
Step1: Connect the speed dome to the bracket.
Use the quick installation screw of the speed dome and the quick instillation block to fix the
speed dome on the bracket. Use the M6 inner hex screw to secure firmly. See Figure 1-5.
Installation Holes
