9
Fix the connection plate to the ceiling and then turn the connection block to the bracket
connection plate. See Figure 2-3.
Figure 2-3
Step 3: Connect cable and the speed dome.
Connect the safety rope of the speed dome to the safety rope hole of the adapter block. Now you
can connect the cable: video, RS485, power (network, alarm, audio are optional). Please note
the cables listed here is for reference only.
Use the quick installation screw of the speed dome and the quick instillation port of the adapter
block to fix the speed dome on the adapter block. Use the M6 inner hex screw to secure firmly.
See Figure 2-4.
Figure 2-4
Please note, if the speed dome is installed in the outdoor environments, you need to paste
the silica gel on the surface of the flange and the surface and the cable exit.
For the speed dome with the straight pole, please refer to the contents below.
Step 1: Dig holes
Hang Mount Bracket
Connection Plate
Adapter Block
Safety Rope
Quick Installation Screw
Quick Installation Port
