61
Figure 4- 42
Please see Figure 4- 42.
Event type: There are three types: Motion detection/video loss/Camera Masking.
Slot and Channel: Select channel name from the dropdown list.
Enable: You need to check box to enable motion detection function.
Region: You can set detect region. Video loss and video mask do not have this function.
Sensitivity: There are 1-6 levels as 6 is highest sensitivity.
Alarm out: You may set alarm output channel of motion detection signal.
Alarm out delay: After alarm event ends, alarm delays for this period within 10 to 300s.
Period: Here you can set alarm period while motion detection function becomes activated in the
specified periods. There are six periods in one day. Please check box to enable corresponding
period. Please click save button to exit. Please see Figure 4- 43.
Summary of Contents for DH-M70-D-0204HO
