Dahua HD Panoramic Multi-sensor Network Dome Camera Quick Start Guide
8
box from the wall, then put them together into the junction box. Use 4 fixing screws to fix the
wall-mount bracket on the junction box. See Figure 2-7.
Figure 2-7 Device and junction box connection
Step 3
Adjust the monitoring direction of the device. See Figure 2-8.
Note
The range of angle adjustment for lens: horizontal rotation direction (0
︒
~ +355
︒
), vertical
rotation direction (0
︒
~ +75
︒
), and image rotation direction (-20
︒
~ +20
︒
).
Horizontal rotation direction
Use the wrench in the accessory bag to loosen the horizontal rotation fixing screw, and rotate the
device enclosure by hand, so you can adjust the horizontal rotation direction for monitoring. Do
not loosen the screw too much to avoid the screw falling. Tighten the screw firmly after
adjustment.
Vertical rotation direction
Open the cover of vertical and image rotation fixing screw, use the wrench to slightly loosen the
fixing screw, and rotate the dome body by hand, so you can adjust the vertical rotation direction
for monitoring. Do not loosen the screw too much to avoid the screw falling. Tighten the screw
firmly and fasten the cover after adjustment.
Figure 2-8 Monitoring Direction Adjustment
