Dahua DH-IPC-PDBW8800 Page 17 Quick Start Manual Download

Page: 17 / 17

Dahua HD Panoramic Multi-sensor Network Dome Camera Quick Start Guide

respectively), click

Login

Note

The default username and password is

admin

and

admin

respectively, please modify the

administrator password as soon as possible after you successfully logged in.

3. Install controls according to the system prompt. See Figure 3-4 for the WEB main interface.

Figure 3-4 WEB main interface

Note



This quick start guide is for reference only. Minor differences might be found in user interface.



All the designs and software are subject to change without prior written notice.



If there is any uncertainty or controversy, please refer to our final explanation.



Please visit our website or contact your local service engineer for more information.

Zhejiang Dahua Vision Technology Co., Ltd

Address: No.1199 B

in’an Road, Binjiang District, Hangzhou, PRC.

Postcode: 310053

Tel: +86-571-87688883

Fax: +86-571-87688815

Email: [email protected]

Website: www.dahuasecurity.com

Summary of Contents for DH-IPC-PDBW8800


















Search results

Summary of Contents for DH-IPC-PDBW8800

Reviews:

Related manuals for DH-IPC-PDBW8800

Brands by name

Popular brands

Dahua DH-IPC-PDBW8800, Quick Start Manual

Search results

Summary of Contents for DH-IPC-PDBW8800

Reviews:

Related manuals for DH-IPC-PDBW8800

Brands by name

Popular brands