Installation 15
4) Open the bottom cover, and then twist to loosen the zoom and focus levers, turn
them left or right to adjust the focus and zoom until you get clear image, see Figure
Model I (2) image adjustment
Figure 3-20
5) Lock the levers and bottom cover, and then fasten the locking screws.
Installing Model J
3.10
Model J installation
Figure 3-21
Table 3-10 Installation item list
No.
Item
No.
Item
①
Device
②
Self-tapping screw
③
Expansion bolt
④
Mounting surface
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 1
the mounting surface
④
) and drill them on the mounting surface
④
, and then insert the
expansion bolts
③
in the screw holes.
Align the screw holes on the bracket to those on the mounting surface
④
, and then pull
Step 2
the cable out through mounting surface or the side cable tray. Attach the bracket to the
mounting surface
④
with the self-tapping screws
②
.
Connect the device
①
to power source and the XVR device, and the live view screen is
Step 3
displayed.
Loosen the locking screws and aim the lens to the ideal angle, and then fasten them,
Step 4
see Figure 3-22.
