Installation 7
Model A (1) and Model A (2) adjustment
Figure 3-2
2) In the PTZ setting interface (Figure 4-5), click + or
– at
Zoom
and
Focus
to adjust
the zoom and focus until you get clear image.
For Model A (2)
1) Loosen the locking screws and aim the lens to the ideal angle, see Figure 3-2.
2) Open the bottom cover, and then twist to loosen the zoom and focus levers, turn
them left or right to adjust the focus and zoom until you get clear image, see Figure
Model A (2) image adjustment
Figure 3-3
3) Lock the levers and bottom cover, and then fasten the locking screws.
Installing Model B
3.2
Model B installation
Figure 3-4
Table 3-2 Installation item list
No.
Item
No.
Item
①
Device
②
Self-tapping screw
