IV
Do not tilt the package more than 30° in transit. There is a label on the surface of the package.
That indicates if the tilted-angle is suitable. It is recommended to slowly carry or transfer the in a
horizontal position.
Do not press, vibrate or soak the Camera during the whole process of transportation, storage and
installation. There are vibration-labels both on the package and Camera. If the vibration
amplitude or frequency is exceeded, the Camera damaged. Please ensure the transportation
condition and site environment is stable and follow the above requirements.
The lens, potentiometer, pan-tilt unit and cooling unit are consumable components. To ensure
their life expectancy, do not allow the Camera zoom or focus, pan-tilt unit and cooling unit to run
uninterruptedly for a long time.
Operation and Maintenance Requirements
●
Do not disassemble the Camera, for there are no components inside that can be repaired by
yourself.
●
An air blower can be used to clean the dust and filth on the lens.
Use the accessories regulated by the manufacturer. The Camera must be installed and maintained
by professionals.
Contact the local dealer or the nearest service center if the Camera fails to work normally.
Do not aim the laser light at human eyes.
