82
Set password. For the second generation access controllers, set the personnel
password; for other devices, set the card password. The new password must consist
of 6 digits.
Configure card.
The card number can be read automatically or filled in manually. For automatically read,
select a card reader, and then place the card on the card reader. The card number is
read automatically after that.
1)
Click
to select
Device
or
Card issuer
as card reader.
2)
Add card. The card number must be added if the non-second generation access
controller is used.
3)
After adding, you can select the card as main card or duress card, or replace the
card with new one, or delete the card.
Configure fingerprint.
1)
Click
to select
Device
or
Fingerprint Scanner
as fingerprint collector.
2)
Add fingerprint. Click
Add Fingerprint
and press finger on the scanner three times
continuously.