75
Click
Export Data
to download the results.
Fusion Calibration
Set up the coordinate relationship between the white light face image and face heat map. When
calibration mode is enabled, the access controller will use the coordinate relationship to
measure temperature on the face heat map.
Only certain models support this function.
Select
Temp Monitoring Mode
to
Calibration Mode
. See "3.10 Face Detection" for
details.
Select
Fusion Calibrate
.
Select a model from
Calibration Mode
according to the type of the access controller.
Set up coordinate relationship
Click
Calibration Point1
.
Click the image on the left, and then left to set up a relationship between the two
locations.
Click
Calibration Confirmed
.
Repeat step 2–4 for calibration point 2–4.
Click
OK
.
(Optional) Click
Default
to reset all configuration the default settings.