64
TCP/IP
Configure parameters.
Table 3-12
TCP/IP
Parameter
Description
IP Version
There is one option: IPv4.
MAC Address
MAC address of the access controller.
Mode
Static:
Set IP address, subnet mask, and gateway address manually.
DHCP
After DHCP is enabled, IP address, subnet mask, and gateway
address cannot be configured.
If DHCP is effective, IP address, subnet mask, and gateway address
will be displayed automatically; if DHCP is not effective, IP address,
subnet mask, and gateway address will all be zero.
If you want to see the default IP when DHCP is effective, you need
to disable DHCP.
Link-local
address
Only available when IPv6 is selected in the IP version. Unique link-local
addresses will be assigned to network interface controller in each local area
network to enable communications. The link-local address cannot be
modified.
IP Address
Enter IP address, and then configure subnet mask and gateway address.
IP address and gateway address must be in the same network segment.
Subnet Mask
Default Gateway
Preferred/
Alternate DNS
Server
Set IP address of the preferred DNS server.
Click
OK
to complete the setting.