17
4.4.1.4 Default
To restore default settings:
Step 1. In local setup interface, press
【
↑
】
or
【
↓
】
key, select default, and press
【
√
】
key.
System asks if to restore or not.
Step 2. Select YES and press
【
√
】
key to restore.
4.4.2 Communication Setup
It sets current access control communication.(Only IP for now)
Step 1. In system settings interface, press
【
↑
】
or
【
↓
】
key, select communication setup,
and press
【
√
】
.
Step 2. Press
【
↑
】
or
【
↓
】
key, select IP setup, and press
【
√
】
.
Step 3. Modify IP, subnet mask, gateway, and press
【
√
】
as follows.
System prompts setup is successful.
4.4.3 Mode
The device suppers two work mode, including “this device as controller” and “this device
as card reader”.
This device as controller: the device is used as an A&C controller for unlock operation.
This device as card reader, the device is used as a card reader, if you need to control
door unlock, then it must be connected to an A&C controller before it can be used.
To set device mode:
Step 1. In system setup interface, press
【
↑
】
key or
【
↓
】
key, select mode setup, and
press
【
√
】
key.
Step 2. Select work mode, and press
【
√
】
.
Step 3. Press
【
↑
】
key or
【
↓
】
key, select work mode, and press
【
√
】
key as follows.
IP Setup
IP
：
172.7.10.33
Sub Mask
：
255.255.255.0
Gateway
：
172.7.0.0
