Installation Guide 10
Alarm
Type
Alarm Event
Alarm Signal Input
Port
Alarm Signal
Output Port
Alarm Status
be normally open.
Internal
alarm
input
Intrusion alarm or
unlock timeout alarm of
no. 1 door
SR1
OUT1
No. 1 alarm gives
an alarm.
Intrusion alarm or
unlock timeout alarm of
no. 2 door
SR2
Intrusion alarm or
unlock timeout alarm of
no. 3 door
SR3
Intrusion alarm or
unlock timeout alarm of
no. 4 door
SR4
Tamper alarm of no. 1
door reader
RS-485/CASE
Tamper alarm of no. 2
door reader
RS-485/CASE
Tamper alarm of no. 3
door reader
RS-485/CASE
Tamper alarm of no. 4
door reader
RS-485/CASE
DIP Switch
Operate with DIP switch.
the switch is at ON position, meaning 1.
the switch is at the bottom, meaning 0.
1
～
8 are all 0; the system is started normally.
1
～
8 are all 1; the system enters BOOT mode after start.
1, 3, 5 and 7 are 1, while others are 0. After restart, the system restores factory defaults.
2, 4, 6 and 8 are 1, while others are 0. After restart, the system restores factory defaults,
but user info is retained.
