Operation 16
Once you have done schedule settings on a terminal, you can export the settings through flash
drives and then import them to other terminals, thus you do not need to do settings repeatedly.
3.6.3 Late-in/Early-out Allowed
Late-in Allowed is used to set flexible working hours. For example the permitted start working
time is 8:30, and the late time is 5 minutes, then if a user gets his/her attendance checked
before 8:35, he/she is not considered to be late.
Early-out Allowed is used to set flexible working hours, too. For example the permitted finishing
working time is 17:30, and the early leave time is 5 minutes, then if a user gets his/her
attendance checked after 17:25, he/she is not considered to have left early.
During Duty 1 and Duty 2 period, you have only one chance to get your attendance
checked late and one chance to leave early.
If you arrive late or leave early within the time period permitted, overtime will still be
counted.
USB
3.7
Select
4 USB
, and then you can import/export user Information, fingerprints, bell information,
and auto switch time. See Figure 3-17.
USB
Figure 3-17
3.7.1 Import/Export User Info
Excel charts with special format are stored in the USB flash drive. You can enter user
information (including user ID, user name, password, card number, department, user level and
schedule mode) into the charts, and then import/export the charts to/from the terminal. User
information with the same user ID will be overwritten.
3.7.2 Import/Export User FP
Fingerprints collected can be imported and exported to/from the terminal.
