User's Manual
7
6 Configuration
You can view and edit general information of the input expander.
6.1 Configuring the Input Expander
On the
Hub
screen, select the input expander as needed from the accessory list, and then tap
to configure the parameters of the input expander.
Table 6-1 Parameter description
Parameter
Description
Device Configuration
●
View device name, type, SN and device model.
●
Edit device name, and then tap
Save
to save configuration.
Area
Select the area to which the input expander is assigned.
Temporary Deactivate
●
Tap
Enable
, and then the function of the input expander will
be enabled.
Enable
is set by default.
●
Tap
Only Disable Tamper Alarm
, and then the system will
only ignore tamper alarm messages.
●
Tap
Disable
, and then the function of the input expander
will be disabled.
24 H Protection Zone
The accessory located in the 24 h protection zone is always
active whether the security system is configured in the armed
mode or not.
Home Mode
Enable the home mode, and then the selected accessories under
the hub will be armed.
Delay Mode under Home
Mode
Enable the
Delay Mode under Home Mode
, the selected
accessory under the hub will be armed and the alarm will not be
triggered until the end of customized delay time.
Only enable
Home Mode
first can
Delay Mode under Home
Mode
take effect.
Delay Time
●
The system provides you with time to leave or enter the
armed zone without alarm.
●
Select from 0 s to 120 s.
The arming mode will be effective after the delay time.
Siren Linkage
When an alarm is triggered, the input expander will report the
alarm events to the hub and alert with a siren.
Alarm-video Linkage
When an alarm is triggered, the input expander will report the
alarm events to the hub and then associate with the video.
Video Channel
Select the video channel as needed.
