Dahua 724 Series Quick Start Manual Download

Page: 32 / 33

Web Login

You can log in the Web interface of the Device via browsers such as Safari, Firefox and

Chrome.

NOTE



Slight difference might be found on the interfaces of different models. Following figures are

for reference only. The actual product shall govern.



Use ChromeApp to log in the Web if the Chrome version is 45 or higher. Go to the Chrome

online store to download the ChromeApp installation package.



Before logging in Web, make sure the network connection between PC and the Device is

ready.

Open the browser and enter the IP address of the Device into the address bar. Press

Step 1

Enter key.

The

Login

interface is displayed. See Figure 3-1.

Figure 3-1

Enter the username and password.

Step 2

The default username is admin, and the login password is the one you set in device

initialization. To ensure device security, it is recommended to modify the admin

password regularly and keep it properly.

Click

Login

Step 3

The

Preview

interface is displayed. On the Web interface, you can perform operations

such as system settings, device management and network settings. For details, see

User’s Manual

NOTE



When you log in Web for the first time, install the control according to system

prompts.



When you want to upgrade Web, delete the original control first. See the following

two ways to delete the control:

Summary of Contents for 724 Series


































Search results

Summary of Contents for 724 Series

Reviews:

Related manuals for 724 Series

Brands by name

Popular brands

Dahua 724 Series, Quick Start Manual

Search results

Summary of Contents for 724 Series

Reviews:

Related manuals for 724 Series

Brands by name

Popular brands