15
2
Overview of Navigation and Controls
2.1
Boot up
Before operation, please make sure:
You have properly installed HDD and all the cable connections.
The provided input power and the device power are matched.
Always use the stable current, if necessary UPS is a best alternative measure.
Please follow the steps listed below to boot up the device.
Connect the device to the monitor and then connect a mouse.
Connect power cable.
Click the power button at the front or rear panel and then boot up the device. After device
booted up, the system is in multiple-channel display mode by default.
2.2
Login
After system booted up, system pops up the startup wizard interface. See Figure 2-1.
Please refer to the user
’s manual for detailed startup wizard operation information.
Tips
Check the box Startup button here, system goes to startup wizard again when it boots up the
next time.
Cancel the Startup button, system goes to the login interface directly when it boots up the next
time.
Figure 2-1
The system login interface is shown as in Figure 2-2.
System consists of four accounts:
Summary of Contents for 6064 Series
Page 1: ...NVR Series Quick Start Guide V4 0 0...
Page 38: ...33 Figure 2 17...
