Dahua 6064 Series Quick Start Manual Download

Page: 10 / 41

Go to menu

Shuttle(outer

ring)

In real-time monitor mode it works as left/right direction key.

Playback mode, counter clockwise to forward and clock wise to

backward.

Jog(inner dial)

Up/down direction key.

Playback mode, turn the inner dial to realized frame by frame

playback. (Only applies to some special versions.)

USB port

To connect USB storage device, USB mouse and etc.

Channel indicator

light

1-16

It becomes on when system is recording.

IR Receiver

It is to receive the signal from the remote control.

Power

indicator

light

POWER

Power indicator light.

Remote

control

indicator light

ACT

Remote control indicator light.

Status

indicator

light

STATUS

If there is Fn indicator light, current status indicator light is null.

HDD

abnormal

indicator light

HDD

The indicator light is on when there is no HDD, HDD error

occurred or HDD capacity is below specified threshold value.

1.2.3 NVR 724 Series

The front panel is shown as in Figure 1-5.

Summary of Contents for 6064 Series










































Search results

Summary of Contents for 6064 Series

Reviews:

Related manuals for 6064 Series

Brands by name

Popular brands

Dahua 6064 Series, Quick Start Manual

Search results

Summary of Contents for 6064 Series

Reviews:

Related manuals for 6064 Series

Brands by name

Popular brands