13
Set and confirm the password of the devices, and then enter a valid email address. Click
Next.
Select the options according to your needs and then click OK.
Click Finish.
Modifying the IP Address
Modify the IP address of one or multiple devices at one time. This section provides
instructions for modifying IP addresses in batch.
Modifying IP addresses in batch is available only when the corresponding devices have
the same login password.
Follow steps 1 through 4 in the section above to initialize the device and to search for
devices in your network segment. Ensure the username and password are the same as
set during the device initialization.
Select the devices whose IP addresses need to be modified, and then click Modify IP.
Select Static mode and enter start IP, subnet mask, and gateway.
IP addresses of multiple devices will be set to the same if you select Same IP.
If DHCP server is available in the network, devices will automatically obtain IP addresses
from DHCP server when you select DHCP.
Click OK.
Accessing the Web Interface
Each camera can be accessed directly from the Internet Explorer Web browser. The Web
Interface allows you to set camera parameter, configure alarm inputs and outputs, view live
camera images, and review recorded video.
Note: Different devices may have different Web interfaces, the figures below are for reference
only, and may not represent the Web Interface for your camera. Refer to the Web Operation
Manual, included on the CD shipped with the camera, for more details.
Summary of Contents for 59232XANR
Page 13: ...2 Dimension ...
