11
Pull the composite cable from the dome through the adapter block and pull it out of the
other end of the wall mount bracket.
9. Line up the hook at the top of the dome enclosure with the inside hole of the adapter
block and then push it to the end. Then, tighten the three M6 screws on the adapter block
firmly. Note: Ensure the M6 screws are fixed tightly to secure the dome to the wall mount.
10. Make the proper wiring connections and supply power to the camera. Refer to
Section 3.2 - Wiring. Note: The video connection is covered by a heat-shrink tube. Once
the video connection is made, gently heat the tube to seal the connection and make it
waterproof.
Summary of Contents for 59232XANR
Page 13: ...2 Dimension ...
